国自产拍亚洲免费视频

<th id="mdhx9"><sup id="mdhx9"></sup></th>
<object id="mdhx9"></object><thead id="mdhx9"></thead>

    The MDC pulse bag filter

    Introduction

    This product is widely used in construction, chemistry, metallurgy, non-metal mines, medicine, food, abrasive materials, plastics and some new materials, which is an ideal dust collection equipment from the aspects of industry and environmental protection.

    Outstanding advantages

        1. The air flow combination is reasonable. It adopts the inlet flow and the downstream filtration to make the dust in the filtering state.
        2. At the same time, it has the effect of cohesive sedimentation, reducing the filter bag load and pulse frequency.
        3,.Filter bag mouth adopts elastic expansion ring seal. With good tightness, convenient disassembly. The frame is resistance welded.
        4. The outer surface is smooth without weld marks, which solves the problem of filter bag and frame wear. The filter bag has a long service life.
        5. According to the working environment, choose filter materials with different performance and specifications. The running resistance is stable, the energy consumption is low, and the dust removal efficiency is greater than 99.9%.

    Introduction of working principle

        Dust-laden gas enters the middle and lower boxes from the air inlet of the dust collector, and the dust and gas are separated through the filtering of the filter bag. Dust is adsorbed on the surface of the filter bag, and clean air passes through the air outlet through the filter bag. Over time, more and more dust accumulates on the surface of the filter bag. According to the program set by the pulse jet instrument, the pulse blow valve is triggered in sequence. The compressed air in the air bag is instantaneously ejected from the holes of the blowpipe and injected into the corresponding filter bag through the venturi. The dust adsorbed on the surface of the filter bag immediately falls off, falls into the ash bucket, and is discharged through the dust discharging valve. drop directly into the warehouse.

    Introduction of Technical Parameters

    Technical Parameter Of The MCD Series Top Pulse Bag Duster
    Technical Parameter Model and apecification
    MDC-24 MDC-36 MDC-48 MDC-60 MDC-72 MDC-84 MDC-96 MDC-108 MDC-120

    Filter area(㎡)

    18 27 36 45 54 63 72 81 90
    Number of filyer bag (piece) 24 36 48 60 72 84 96 108 120
    Filyer bag size (mm) Φ127*2000
    Working temprature(℃) <120(滌綸)
    Equipment resistance(Pa) 1000-1500
    Efficiency of dust collection (%) 99
    Dust concentration at inlet(mg/㎡) <15
    Velocity of filtering(m/min) 0.5-4
    Airflow dealer(m3/h) 540-4300 810-64800 1080-8640 1350-10800 1620-12900 1890-15100 2160-17200 2430-19400 2700-21600
    Injection pressure(Pa) 0.5-0.7
    Pulse electromagnetic valve(piece) 4 6 8 10 12 14 16 18 20
    Pulse width(s) 0.1-0.2
    Pulse period(s) 60-120
    Pulse interval (s) 1-5
    Overall dimension(mm) 1100*1685*2527 1500*1685*2527 1900*1685*2527 2300*1685*2527 2700*1685*2527 3100*1685*2527 3600*1685*2527 400*1685*2527 4400*1685*2527
    Global Contact
    Tel:0086-536-3163838
    Email:cnguote@163.com
    Address:East of Dongjing Road, Qingzhou,Weifang City, Shandong Province, P.R.CHINA_262500
    China Contact
    TEL:0086-536-3685656
    Email:cnguote@163.com
    Address:East of Dongjing Road, Qingzhou,Weifang City, Shandong Province, P.R.CHINA_262500
    国自产拍亚洲免费视频
    <th id="mdhx9"><sup id="mdhx9"></sup></th>
    <object id="mdhx9"></object><thead id="mdhx9"></thead>